MKH-50 Profile for Line Audio CM4

$3.99

Enjoy this EQ profile that allows a Line Audio CM4 Cardioid Mic to emulate a Sennheiser MKH-50 Supercardioid Mic. Using precise custom full range microphone test tones and Fab Filter Pro-Q 3’s unparalleled EQ-Match engine, this preset fully emulates the entire spectrum of sound of the Sennheiser MKH-50 Microphone.

This emulation was created in 48kHz using the cleanest high-end equipment, such as Sound Devices Mixpre 6 II, Vermouth 2ndborn Cables, and Kali Audio full-range monitors.

Of course, it is impossible to 100% clone the MKH-50 due to so many physical differences and variables such as the super vs wide cardioid polar patterns, but this is as close as an EQ emulation might get. Your mileage may vary.

If nothing else, it is an excellent starting point for matching the mics.

Requirements:

  • Line Audio CM4 Microphone

  • Fab Filter Pro-Q 3 Plugin

To load this preset in PRO-Q 3:

-Download the "TPS MKH50 Profile for CM4.ffp" preset and take note of where you've saved it

-Launch the PRO-Q 3 plugin inside your favorite DAW

-Click on the PRESETS button at the top and slight right of PRO-Q 3

-Click OPTIONS and then OPEN OTHER PRESET

-Navigate to where you've saved the "TPS MKH50 Profile for CM4.ffp" and add it.

Voila! 

You can purchase Fab Filter's glorious PRO-Q 3 here:

GET PRO-Q 3!

Add To Cart

Enjoy this EQ profile that allows a Line Audio CM4 Cardioid Mic to emulate a Sennheiser MKH-50 Supercardioid Mic. Using precise custom full range microphone test tones and Fab Filter Pro-Q 3’s unparalleled EQ-Match engine, this preset fully emulates the entire spectrum of sound of the Sennheiser MKH-50 Microphone.

This emulation was created in 48kHz using the cleanest high-end equipment, such as Sound Devices Mixpre 6 II, Vermouth 2ndborn Cables, and Kali Audio full-range monitors.

Of course, it is impossible to 100% clone the MKH-50 due to so many physical differences and variables such as the super vs wide cardioid polar patterns, but this is as close as an EQ emulation might get. Your mileage may vary.

If nothing else, it is an excellent starting point for matching the mics.

Requirements:

  • Line Audio CM4 Microphone

  • Fab Filter Pro-Q 3 Plugin

To load this preset in PRO-Q 3:

-Download the "TPS MKH50 Profile for CM4.ffp" preset and take note of where you've saved it

-Launch the PRO-Q 3 plugin inside your favorite DAW

-Click on the PRESETS button at the top and slight right of PRO-Q 3

-Click OPTIONS and then OPEN OTHER PRESET

-Navigate to where you've saved the "TPS MKH50 Profile for CM4.ffp" and add it.

Voila! 

You can purchase Fab Filter's glorious PRO-Q 3 here:

GET PRO-Q 3!

Enjoy this EQ profile that allows a Line Audio CM4 Cardioid Mic to emulate a Sennheiser MKH-50 Supercardioid Mic. Using precise custom full range microphone test tones and Fab Filter Pro-Q 3’s unparalleled EQ-Match engine, this preset fully emulates the entire spectrum of sound of the Sennheiser MKH-50 Microphone.

This emulation was created in 48kHz using the cleanest high-end equipment, such as Sound Devices Mixpre 6 II, Vermouth 2ndborn Cables, and Kali Audio full-range monitors.

Of course, it is impossible to 100% clone the MKH-50 due to so many physical differences and variables such as the super vs wide cardioid polar patterns, but this is as close as an EQ emulation might get. Your mileage may vary.

If nothing else, it is an excellent starting point for matching the mics.

Requirements:

  • Line Audio CM4 Microphone

  • Fab Filter Pro-Q 3 Plugin

To load this preset in PRO-Q 3:

-Download the "TPS MKH50 Profile for CM4.ffp" preset and take note of where you've saved it

-Launch the PRO-Q 3 plugin inside your favorite DAW

-Click on the PRESETS button at the top and slight right of PRO-Q 3

-Click OPTIONS and then OPEN OTHER PRESET

-Navigate to where you've saved the "TPS MKH50 Profile for CM4.ffp" and add it.

Voila! 

You can purchase Fab Filter's glorious PRO-Q 3 here:

GET PRO-Q 3!