MKH-50 Profile for Oktava MK-012 Hypercardioid (Complex Version)
Enjoy this EQ profile that allows an Oktava MK-012 Hypercardioid Mic to emulate a Sennheiser MKH-50 Supercardioid Mic. Using precise custom full range microphone test tones and Fab Filter Pro-Q 3’s unparalleled EQ-Match engine, this preset fully emulates the entire spectrum of sound of the Sennheiser MKH-50 Microphone.
This emulation was created in 48kHz using the cleanest high-end equipment, such as Sound Devices Mixpre 6 II, Vermouth 2ndborn Cables, and Kali Audio full-range monitors.
Of course, it is impossible to 100% clone the MKH-50 due to so many physical differences and variables, but this is as close as an EQ emulation might get. Your mileage may vary.
If nothing else, it’s an excellent starting point for mic matching.
Requirements:
Oktava MK-012 Microphone (with hypercardioid capsule)
Fab Filter Pro-Q 3 Plugin
To load this preset in PRO-Q 3:
-Download the "TPS MKH50 Profile for Oktava MK-012 (complex).ffp" preset and take note of where you've saved it
-Launch the PRO-Q 3 plugin inside your favorite DAW
-Click on the PRESETS button at the top and slight right of PRO-Q 3
-Click OPTIONS and then OPEN OTHER PRESET
-Navigate to where you've saved the "TPS SM7B Profile for SM57.ffp" and add it.
Voila!
You can purchase Fab Filter's glorious PRO-Q 3 here:
Enjoy this EQ profile that allows an Oktava MK-012 Hypercardioid Mic to emulate a Sennheiser MKH-50 Supercardioid Mic. Using precise custom full range microphone test tones and Fab Filter Pro-Q 3’s unparalleled EQ-Match engine, this preset fully emulates the entire spectrum of sound of the Sennheiser MKH-50 Microphone.
This emulation was created in 48kHz using the cleanest high-end equipment, such as Sound Devices Mixpre 6 II, Vermouth 2ndborn Cables, and Kali Audio full-range monitors.
Of course, it is impossible to 100% clone the MKH-50 due to so many physical differences and variables, but this is as close as an EQ emulation might get. Your mileage may vary.
If nothing else, it’s an excellent starting point for mic matching.
Requirements:
Oktava MK-012 Microphone (with hypercardioid capsule)
Fab Filter Pro-Q 3 Plugin
To load this preset in PRO-Q 3:
-Download the "TPS MKH50 Profile for Oktava MK-012 (complex).ffp" preset and take note of where you've saved it
-Launch the PRO-Q 3 plugin inside your favorite DAW
-Click on the PRESETS button at the top and slight right of PRO-Q 3
-Click OPTIONS and then OPEN OTHER PRESET
-Navigate to where you've saved the "TPS SM7B Profile for SM57.ffp" and add it.
Voila!
You can purchase Fab Filter's glorious PRO-Q 3 here:
Enjoy this EQ profile that allows an Oktava MK-012 Hypercardioid Mic to emulate a Sennheiser MKH-50 Supercardioid Mic. Using precise custom full range microphone test tones and Fab Filter Pro-Q 3’s unparalleled EQ-Match engine, this preset fully emulates the entire spectrum of sound of the Sennheiser MKH-50 Microphone.
This emulation was created in 48kHz using the cleanest high-end equipment, such as Sound Devices Mixpre 6 II, Vermouth 2ndborn Cables, and Kali Audio full-range monitors.
Of course, it is impossible to 100% clone the MKH-50 due to so many physical differences and variables, but this is as close as an EQ emulation might get. Your mileage may vary.
If nothing else, it’s an excellent starting point for mic matching.
Requirements:
Oktava MK-012 Microphone (with hypercardioid capsule)
Fab Filter Pro-Q 3 Plugin
To load this preset in PRO-Q 3:
-Download the "TPS MKH50 Profile for Oktava MK-012 (complex).ffp" preset and take note of where you've saved it
-Launch the PRO-Q 3 plugin inside your favorite DAW
-Click on the PRESETS button at the top and slight right of PRO-Q 3
-Click OPTIONS and then OPEN OTHER PRESET
-Navigate to where you've saved the "TPS SM7B Profile for SM57.ffp" and add it.
Voila!
You can purchase Fab Filter's glorious PRO-Q 3 here: